-60 ~ 125 ℃ 4-Digit Digital Thermostat Digital Intelligent Control 10A Display

  • Item ID #100280
Qty.:

List Price: $28.79 Our Price: $14.96Save 48%

Price(per unit)
1-4
$14.96
5-9
$14.21
10-29
$13.46
30-49
$12.72
50+
$11.97
Buy More: please contact us

 It is a -60 ~ 125 ℃ Digital Thermostat,Input Output voltage: 220V AC,Suitable for greenhouse seedling-raising, propagation, and home heating ect.


Other Products in Thermometers

page 1 of 2 Previous Page Next Page



Parameters:

  • Temperature measuring range: -60 ~ 125
  • Temperature measuring accuracy: 0.1
  • Control accuracy: 0.1
  • Input voltage: 220V AC
  • Measuring inputs: NTC (10K) waterproof sensor
  • Output: 220V AC
  • Suitable for greenhouse seedling-raising, propagation, and home heating ect.

Instructions

The window displays the current temperature after powered, long press Ent button to turn off the thermostat, press the Ent key once again to start. Press the Set button it will displays the setting temp and flashes, press to set the temperature, then press Set or Ent to save parameters and return main interface.

Long press Set button for 5 seconds to enter setting menu, press button to switch to P0 ~ P7, press the Ent or 10 seconds no action,it will save parameters automatically and return to the main interface.

P0 cooling, heating mode

Press Set button for 5 s to display P0, then press the Set button to display the [H], Press to switch to [H-heating mode] [C-cooling mode], then press Set to return to P0, press Ent to save parameters and return to the main interface .

P1 temp difference setting

Press Set button for 5 s to display P0, press to switch to P1, then press Set button to enter the temp difference setting, press to set the temp difference, the range is 0.1 ~ 30 , then press Set to return to P1, press Ent to save parameters and return to the main interface.

P2 temp upper limit setting

Press Set button for 5 s to display P0, press to switch to P2, press Set to enter the temp upper limit setting, press to set the temp limit setting range is -55 ~ 125 , then press Set to return P2, press Ent to save parameters and return to the main interface.

P3 temperature lower limit setting

Press Set button for 5 s to display P0, press to switch to P3, press Set to enter the temp lower limit setting, press to set the temp limit setting range is -60 ~ 120 , then press Set to return P3, press Ent to save parameters and return to the main interface.

P4 temperature calibration

When measuring temp and the standard temp are deviated, or you have special needs, you can use this function to calibrate. Press Set button for 5 s to display P0, press to switch to P4, press Set button to enter temperature calibration settings, press to set the temp range of -10 ~ 10 , then press Set button to return P4, press Ent to save parameters and return to the main interface.

P5 start delay setting

Press Set button for 5 seconds to display P0, press to switch to P5, press Set to enter the start delay setting, press key to set the delay time, the range is 0-10 minutes, then press the Set return to P5, press Ent to save parameters and return to the main interface.

P6 high temp alarm settings

Press Set button for 5 s to display P0, press to switch to P6, press Set button to enter the high temp alarm condition setting, press to switch to ON, then press Set button to enter the high temp alarm settings, setting range is -50 ~ 125 , press the Set button to return to P6, press Ent to save parameters and return to the main interface.

P7 button lock

Press Set button for 5 seconds to display P0, press to switch to P7, press Set button to enter the settings, press the button to set ON / OFF, press the Set button to return to P7, press Ent to save parameters and return to the main interface.

Package include:

  • 1x Digital thermostat (Flat Plug)



Reviews

* Required information
Choose a ranking for this item. 1 star is the worst and 5 stars is the best.
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed