Digital Meter AC 80~300/100A Voltmeter/Ammeter/Power Meter/Energy Meter/Power Factor Meter/Frequency Meter 6in1 Digital Tester

  • Item ID #200304
Qty.:

List Price: $37.50 Our Price: $18.50Save 51%

Price(per unit)
1-4
$18.50
5-9
$17.58
10-19
$16.65
20-29
$15.73
30+
$14.80
Buy More: please contact us

It is a Digital Tester/Multifunction Digital Meter, Measure Voltage Range: AC 80.0~300.0V; Measure Current Range: AC 0~100A, It has small size, high efficiency, long term stable and reliable quality,easy installation and use . Applied for pure AC 50Hz or 60Hz commercial power supply.


Other Products in Multifunction Tester

page 1 of 2 Previous Page Next Page
Parameters:
  • Measure Voltage Range: AC 80.0~300.0V;
  • Measure Current Range: AC 0~100A
  • Measuring power Range: 0.0~30000W
  • Measuring electric energy Range: 0.000~99999kwh
  • Power frequency: 45.00~65.00Hz
  • Measuring accuracy: 1% ± 2 digits
  • Power factor: 1.000~0.000
  • Display mode: AC voltage and power factor use 4 digits 0.31-inch Red LED digital tube; AC current and power frequency use 5 digits 0.31-inch Red LED digital tube; Active power and energy use 5 digits 0.31-inch Green LED digital tube
  • Measuring speed: twice per second
  • Installation Width: =3P (sum of width of three DZ47/C45)
  • Size: 54*80*64mm
  • Installation Method: DIN-rail (general DIN-rail for air circuit breaker)
Wiring and Guide:
  • Connect the measuring voltage to the terminal 1 and 2.
  • Connect the two green wires of current transformer to the terminal 5 and 6. Please let the wire of the return circuit pass through the hole of transformer.
  • When power on, the meter displays the measuring result of the AC voltage (V), AC current (A) and active power (W). The Red LED on the right side of the corresponding display window lights up.
  • When press the SAM CK button of instrument board, the display functions are switched to be the measuring result of power factor (cosΦ), power frequency (Hz) and electric energy (kwh). The Green LED on the right side of the corresponding display window lights up.
  • And if press the SAM CK button again, the meter will display the original functions (V, A and W) again.
  • Reset the electric energy measurement: When the meter is displaying electric energy with Green LED lights up, you can press the SAM CK button (last for about 5 seconds) until the meter displays the value of electric energy to be 0. Then release the button and the meter will measure the electric energy from 0.
Extremely Operating Condition:
  • Operating temperature: -10~+60℃
  • Operating humidity: 10~80% (No condensation)
  • Operating pressure: 80~106kPa
  • Sunlight exposure: No direct exposure
Note:
  • The value of electric energy can be automatically saved, power-down will not lose the value of electric energy. When re-connected to the measuring power, the meter will accumulate the original saved data.
  • This instrument is only suitable for pure AC 50Hz or 60Hz commercial power supply. Cannot be used for square wave, inverter output or modified sine wave. Otherwise, it will damage the instrument and the measurement results will be incorrect.
Package includes:
  • 1 x Digital Multi-functional Meter ( Digital Tester )

Reviews

* Required information
Choose a ranking for this item. 1 star is the worst and 5 stars is the best.
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed